home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Atari Mega Archive 1
/
Atari Mega Archive - Volume 1.iso
/
gnu
/
gas
/
src138.zoo
/
Makefile.cross
< prev
next >
Wrap
Makefile
|
1991-01-21
|
7KB
|
237 lines
CROSSDIR = /net/acae127/home/bammi/atari/cross-gcc
CROSSBIN = $(CROSSDIR)/bin
CROSSLIB = $(CROSSDIR)/lib
CROSSINC = $(CROSSDIR)/include
# This makefile may be used to make the VAX, the 68020 the 80386 or the
# ns32k assembler.
# If you just want to compile the vax assembler, type 'make avax'
# If you just want to compile the mc68020 assembler, make sure m68k.h
# is correctly set up, and type type 'make a68' (Except on HPUX machines,
# where you will have to make the changes marked below before typing
# 'make a68'
# If you just want to compile the i386 assembler, type 'make a386'
# If you just want to compile the ns32k assembler, type 'make a32k'
# To make the 68020 assembler compile as the default, un-comment the next
# five lines (the first line starts with a:), and comment out the
# a: groups for the other assemblers.
#
#NOTE: m68k.h should be a symbolic or hard-link to one of
# m-sun3.h , m-hpux.h or m-generic.h
# depending on which machine you want to compile the 68020 assembler for.
#
# To compile for HPUX, link m-hpux.h to m68k.h , un-comment the
# next two lines, and comment out the OPTIONS line below
# OPTIONS = -I../hp-include -I.
# LOADLIBES = -lGNU
#
# If you want the 68k assembler to be completely compatable with the the
# SUN one, un-comment the -DSUN_ASM_SYNTAX line below.
#
# If you machine does not have vfprintf, but does have _doprnt(),
# remove the # from the -DNO_VARARGS line below.
#
# If the return-type of a signal-hander is void (instead of int),
# remove the # from the -DSIGTY line below.
#
# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
# remove the # from the -Dm68851 line below.
#
# If you want the 68020 assembler use a register prefix character, un-comment
# the REGISTER_PREFIX line, and (maybe) change the '%' to the appropriate
# character.
#
# If you want the assembler to treat .L* or ..* symbols as local, instead of
# the usual L* symbols, un-comment the DOT_LABEL_PREFIX line.
#
# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
# opcodes (unlike most 80386 assemblers), remove the # from
# the -DNON_BROKEN_WORDS line below.
#
# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION
# and the -DUSE_SYSTEM_HDR lines below.
#
# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below.
#
# For the ns32k, the options are 32532 or 32032 CPU and 32381 or 32081 FPU.
# To select the NS32532, remove the # from the -DNS32532 line below.
# To compile in tne NS32381 opcodes in addition to the NS32081 opcodes
# (the 32381 is a superset of the 32081), remove the # from the -DNS32381
# line below.
#
# For the ns32k on a Sequent, uncomment the SEQUENT_COMPATABILITY line below.
#
# If you want the .align N directive to align to the next N byte boundry,
# instead of the next 1<<N boundry, un-comment the OTHER_ALIGN line below.
# (This option is automatically enabled when building the sparc assembler.
#
O1 = # -DNO_VARARGS
O2 = # -DNON_BROKEN_WORDS
O3 = -Dm68851
O4 = # -DEXEC_VERSION=1
O5 = -DSIGTY=void
O6 = # -DNS32532
O6 = # -DNS32381
O7 = # -DDOT_LABEL_PREFIX
O8 = # -DSEQUENT_COMPATABILITY
O9 = # -DREGISTER_PREFIX=\'%\'
O10= # -DOTHER_ALIGN
G1 = # -DUSE_SYSTEM_HDR
G2 = # -DUSE_HP_HDR
G3 = # -DSUN_ASM_SYNTAX
OPTIONS = -DCROSSATARI=1 $(O1) $(O2) $(O3) $(O4) $(O5) $(O6) $(O7) $(O8) $(O9) $(O10)
a: a68
@rm -f a
@ln a68 a
lint: lint_68k
# To make the VAX assembler compile as the default, un-comment the next five
# lines, and comment out the a: group of lines for the other assemblers.
#OPTIONS =
#a: avax
# @rm -f a
# @ln avax a
#lint: lint_vax
# To make the 80386 assembler compile as the default, un-comment the
# next five lines, and comment out the 'a:' groups for the other assemblers.
#OPTIONS =
#a: a386
# @rm -f a
# @ln a386 a
#lint: lint_386
# To make the ns32k assembler compile as the default, un comment the
# next five lines, and comment out the 'a:' groups for the other assemblers.
#OPTIONS =
#a: a32k
# @rm -f a
# @ln a32k a
#lint: lint_32k
#
CC=cc
CFLAGS = -O -I. $(OPTIONS)
LDFLAGS = $(CFLAGS)
# To compile gas on a System Five machine, comment out the two lines above
# and un-comment out the next three lines
# CFLAGS = -g -I. -DUSG $(OPTIONS)
# LDFLAGS = $(CFLAGS)
# LOADLIBES = -lmalloc -lPW
a =\
as.o xrealloc.o xmalloc.o hash.o hex-value.o \
atof-generic.o append.o messages.o expr.o app.o \
frags.o input-file.o input-scrub.o output-file.o \
subsegs.o symbols.o version.o \
flonum-const.o flonum-copy.o flonum-mult.o strstr.o bignum-copy.o \
obstack.o
y =\
m68k.o atof-ieee.o read.o write.o
Y = m68k.c atof-ieee.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h
a68: $a $y
$(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES)
atof-ieee.o: flonum.h
hash.o: hash.c
$(CC) -c $(CFLAGS) -Derror=as_fatal hash.c
xmalloc.o: xmalloc.c
$(CC) -c $(CFLAGS) -Derror=as_fatal xmalloc.c
xrealloc.o: xrealloc.c
$(CC) -c $(CFLAGS) -Derror=as_fatal xrealloc.c
m68k.o: gnu-out.h as.h expr.h flonum.h frags.h hash.h
m68k.o: m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h
app.o: as.h
as.o: gnu-out.h as.h read.h struc-symbol.h write.h
atof-generic.o: flonum.h
bignum-copy.o: bignum.h
expr.o: gnu-out.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h
expr.o: symbols.h
flonum-const.o: flonum.h
flonum-copy.o: flonum.h
flonum-mult.o: flonum.h
flonum-normal.o:flonum.h
flonum-print.o: flonum.h
frags.o: gnu-out.h as.h frags.h obstack.h struc-symbol.h subsegs.h
hash.o: hash.h
input-file.o: input-file.h
input-scrub.o: as.h input-file.h read.h
messages.o: as.h
obstack.o: obstack.h
read.o: gnu-out.h as.h expr.h flonum.h frags.h hash.h md.h obstack.h
read.o: read.h struc-symbol.h symbols.h
subsegs.o: gnu-out.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h
symbols.o: gnu-out.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h
write.o: gnu-out.h as.h md.h obstack.h struc-symbol.h subsegs.h
write.o: symbols.h write.h
flonum.h: bignum.h
# app is no longer a separate process.
# app: app.c
# $(CC) -o app app.c
clean:
rm -f a avax a68 a386 $a $w $x $y $z a core gmon.out bugs a.out
oprint: oprint.o pp.o
$(CC) $(LDFLAGS) -o oprint oprint.o pp.o
A =\
as.c xrealloc.c xmalloc.c hash.c hex-value.c \
atof-generic.c append.c messages.c expr.c bignum-copy.c \
frags.c input-file.c input-scrub.c output-file.c read.c \
subsegs.c symbols.c write.c strstr.c \
flonum-const.c flonum-copy.c flonum-mult.c app.c version.c \
obstack.c
B =\
m68k.c atof-m68k.c
H = \
gnu.out.h as.h bignum.h expr.h flonum.h \
frags.h hash.h input-file.h m68k-opcode.h md.h \
obstack.h read.h struc-symbol.h subsegs.h i386.h \
symbols.h vax-inst.h vax-opcode.h write.h i386-opcode.h \
m-sun3.h m-generic.h pmmu.h m-hpux.h ns32k-opcode.h
V = \
make-gas.com objrecdef.h vms.c
# JF unused flonum-normal.c flonum-print.c cpystr.c
lint_68k:
lint -I. $A $B
gas-dist.tar: COPYING README $A $B $C $D $E $H $V Makefile
tar cvf gas-dist.tar COPYING README $A $B $C $D $E $H $V Makefile
gas-dist.tar.Z: gas-dist.tar
compress < gas-dist.tar > gas-dist.tar.Z
dist: gas-dist.tar gas-dist.tar.Z
install: a
cp a $(CROSSLIB)/gcc-as